On-board deployment of airbag

1. On-board simultaneous deployment tool

This is a very useful tool which enables simultaneous on-board processing of all airbags by connecting it with the airbag computer of the vehicle. In case of Toyota vehicles, this device can be applied to almost all vehicles type approved after 1997.

Watch movie (Japanese only)Windows Media

(Windows Media, 279Kbps)

2. Individual deployment tool

This is a tool to individually deploy each airbag on a vehicle that is not equipped with a computer suitable for simultaneous on-board processing. It works by a connection of power wires of each airbag to this tool. As one-touch wire connection is possible in a short time, it is an efficient tool for deployment. This tool can be used for all electric type airbags.

  • Airbag
  • Switch
  • 12V
  • Connector
  • Airbag computer about 90% reductions of working hours.

Watch movie (Japanese only)Windows Media

(Windows Media, 279Kbps)

3. Removing tool

The Air drive saw is an efficient tool to remove airbags. Since the airbag for the front passenger seat is installed in the instrument panel, it may be easily removed by cutting the instrument panel with an air drive saw.

Watch movie (Japanese only)Windows Media

(Windows Media, 279Kbps)

The Air drive saw
The Air drive saw

4. Recovering Airbags with Air-saw

Toyota has developed a method to remove the passenger seat airbag quickly by cutting the instrument panel with an air-saw.

Dismantling Technologies